 |
 |
 |
 |
 |
 |
 |
 |
|
#1
06-15-2010, 03:21 AM
|
|||
|
|||
CTS-V Accessory Kit on LQ9
Will the Pace Performance Kit with the low mount alternator and a/c compressor work on an LQ9 block in a 68 Camaro? I know I'll need to notch the frame for the a/c compressor and possibly the alternator, but I'm curious if the a/c compressor location is the same or close to the same as the 98-02 F-Body Kit. I will also need to drill and tap some holes for the alternator bracket I hear.
Here's the kit I'm looking at. http://paceperformance.com/index.asp...&ProdID=199032
__________________
Chris 1968 Camaro: DSE tubs and sub frame connectors, Chassisworks G-Link rear suspension, Speedtech upper and lower control arms, Chicane front coilover conversion with QA1's, 13" Baer Track series brakes, 18" Forgeline SO3's, Vintage Air, etc. http://www.cardomain.com/ride/2391864 Build Thread: http://www.lateral-g.net/forums/showthread.php4?t=19253 
|
|
#2
07-14-2010, 03:45 PM
|
||||
|
||||
|
The A/C will not fit with any OEM front ACC kit. You will need an A/C relocation kit to move it onto the top of the PS head.
Also you will have to drill and tap the block to run the F-Body or Cts-V accessories which are the same design. The corvette will bolt right on without any drilling but will still need the A/C relocation kit.
__________________
www.RetroLSX.com 678 807 7652  LS swaps kits and LHX oil pan LS crate and pullout engines Fuel Systems EFI harnesses All things LS!
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT. The time now is 01:31 PM.
