Old Geezer
02-19-2009, 04:04 PM
As a starter, here's the custom mounts I make. They use the stock GM mid 70's rubber mts, and C4orce adapter plates.
The engine will be using the stock truck exh manifolds, stock intake, and a hi mount Kwik Performance a/c mount.
The trans is a 4L65E. The rear end is stock 55 w/ 3.70 gears.
The car is being built as a long distance cruiser, and will be as "low buck" as practical.. More later.:D
The engine will be using the stock truck exh manifolds, stock intake, and a hi mount Kwik Performance a/c mount.
The trans is a 4L65E. The rear end is stock 55 w/ 3.70 gears.
The car is being built as a long distance cruiser, and will be as "low buck" as practical.. More later.:D