PDA

View Full Version : Kwik alternator relocation kit info from our 64 GTO

retrolsx
02-17-2009, 09:00 PM
Kwik alternator relocation kit

Hey this is the 64 Lemans Rat Rod, I ran into right clearances on the 64-67 A-Bodys and while the stock Alternator on from the camaro worked it was just a TIGHT fit. Here are some before photos

http://i281.photobucket.com/albums/kk209/BRPHotRods/1a-3.jpg
http://i281.photobucket.com/albums/kk209/BRPHotRods/IMG_0050.jpg
http://i281.photobucket.com/albums/kk209/BRPHotRods/123.jpg
http://i281.photobucket.com/albums/kk209/BRPHotRods/dddd.jpg
http://i281.photobucket.com/albums/kk209/BRPHotRods/cc-4.jpg
http://i281.photobucket.com/albums/kk209/BRPHotRods/aaaaa.jpg

I got the kit from www.KWIKPerf.com (http://www.kwikperf.com/) and had great luck with the kit, this also works great on the 82-03 S10s

Kit info
http://kwikperf.com/lsx_alt_ps.html (http://kwikperf.com/lsx_alt_ps.html)

Kit works on the GTO or Camaro/Firebird

http://i281.photobucket.com/albums/kk209/BRPHotRods/IMG_0138.jpg
http://i281.photobucket.com/albums/kk209/BRPHotRods/IMG_0140.jpg
http://i281.photobucket.com/albums/kk209/BRPHotRods/IMG_0141.jpg
http://i281.photobucket.com/albums/kk209/BRPHotRods/IMG_0142.jpg
http://i281.photobucket.com/albums/kk209/BRPHotRods/IMG_0144.jpg


KWIK install guide
http://kwikperf.com/pdf/alt_ps_bracket_inst.pdf (http://kwikperf.com/pdf/alt_ps_bracket_inst.pdf)
johnnynumber5
04-06-2009, 10:47 PM
you got any better pics of the clearance between the alt and valve cover and coil packs?
retrolsx
04-15-2009, 08:46 PM
Ill take some and get back to you on it
johnnynumber5
04-18-2009, 06:09 PM
thanks! i looking into some coil covers like this for my chevelle.
http://i232.photobucket.com/albums/ee156/573johnnynumber5/PowerTour08074.jpg
retrolsx
05-20-2009, 08:22 PM
http://i281.photobucket.com/albums/kk209/BRPHotRods/IMG_0142-1.jpg

http://i281.photobucket.com/albums/kk209/BRPHotRods/IMG_0141-1.jpg

http://i281.photobucket.com/albums/kk209/BRPHotRods/IMG_0138-1.jpg



I like the coil packs but make sure you don’t cook them because you trap heat with those set ups. I like the way it looks but i would cut vent holes in the valve covers and i have noticed a couple versions of the kit but only a few have breathers in the adapter blocks as well.
MargeWarm
02-04-2012, 07:03 AM
meble biurowe (http://future-meble.pl)
MargeWarm
02-04-2012, 07:09 AM
meble biurowe (http://future-meble.pl)