F/S 1 3/4 -- 3/4 Length BRP Headers (made 400RWHP) $400.00

[VETTEDNABU]

Guys,

Within the next 2 weeks these will be coming off and new set of 1 7/8 headers going on since we are doing Heads and intake swap.

Stock Block -- Stock 243 Heads --- Stock Ls6 Intake with 3.73's we made 400RWHP on the dyno.

These fit great, had to dipple for the steering

SOLD!!!!

Ralph
Boostinblazer92@aol.com

[fgollatz]

BRP 1-7/8 longtubes are a tight fit on the driver side. They are a little too tight to the trans (4L80E) and interfere with the shifter linkage. They may be able to be bent out or a custom inverted linkage fabricated.

I was told the 4L60E pan is even a little wider.

http://lh6.ggpht.com/_ve_UTB9s-QQ/S6gRujWH_fI/AAAAAAAAAhs/JOFwk9PGeYQ/s640/IMG_0104.JPG

http://lh4.ggpht.com/_ve_UTB9s-QQ/S6gRwIH_GuI/AAAAAAAAAiA/ZovVALGe-2c/s640/IMG_0108.JPG

http://lh6.ggpht.com/_ve_UTB9s-QQ/S6gRvHGNGOI/AAAAAAAAAiw/vbgz3-3iEpE/s512/IMG_0106.JPG

[Chevy408]

What vehicle do these headers fit? Are they ceramic coated or painted?

[VETTEDNABU]

They were ceramic coated from Hedman but it looked like it polished up alittle after they came off.

Here are some pictures all G-Bodys ( Fitment always depends on your placement of the motor in that car)

http://i40.photobucket.com/albums/e220/ViciousV6/Parts%20and%20Pieces/IMG_4218.jpg

http://i40.photobucket.com/albums/e220/ViciousV6/Parts%20and%20Pieces/IMG_4219.jpg

http://i40.photobucket.com/albums/e220/ViciousV6/Parts%20and%20Pieces/IMG_4220.jpg

Also included is the collectors with 02 bungs welded on, this was not included with the headers new.