Ly6-6l90e

[1096as]

Recently I bought an LY6-6L90E combo', I'm fitting it to a Holden WB one tonner. First thing I'll do is fit an l76 intake manifold. Anyone know weather the throttle body on a LY6 is the same as an L76?? For those that are wondering what a Holden WB one tonner is , check out this site. www.proutes.com it's an Australian ute based forum, so check it out.

Cheers,

Barra..

[retrolsx]

It will bolt on but its a little smaller in size and thats about it. How much do the L76 intakes go for down there? they are about gone from all street cars now?

[1096as]

Shawn,
I contacted one of the performance upgrade workshops the other day to see if he had any preowned manifolds off engines that they had fitted a blower to. He said he had one LS2 manifold & I could have it for $350 aud. I thought this was a bit rich seeing as how it really cost him nothing. But thems the breaks. If I wanted a new one they're upwards of $700 aud. When you say that it's a bit smaller do you mean the throttle body or the manifold? I'm interested in if the existing throttle body will fit a L76 / LS2 manifold, or is it a different size?

Cheers,

Barra.

[retrolsx]

DO NOT BUY THAT LS2 set up!

It will not fit!!!

the LY6 has the L92 heads which are rectangle port and the LS2 is cathedral port. The only intakes you can run are the L76 or LS3!
your TB will work on the LS3 or L76 intake.

[1096as]

Thanks Shawn, i wasn't going to buy it anyway I just rang hime for a ballpark pricing. But thanks for the info on the manifolds etc.

Barra..

[LSXWorks]

Did you manage to find what you need Barra?

FYI Truck TB's are generally different to car TB's. Pre 09 they opened in the opposite direction and would only operate properly with their respective ECM's.

[1096as]

Shawn,
I'm still looking, the eng and trans only arrived last friday, it's missing it's ecm and harnesses, but Bart is going to sort this out for me. Would you be able to give me a rough price on a Mast' phaser camshaft for the LY6. I'm already thinking more horses.

Cheers,

Barra.

[345HP87SSAC]

Let me know how this goes. I have my car at Bart and Shawn's shop with a LY6 and 4l85e combo going in.

[86GbodyDude]

Wow sweet. That's your version of our El Camino! I've seen a couple of pics of them!

[345HP87SSAC]

I have the Aerocoupe Monte SS in there. There is also an ELKY there. My first car was an 83 SS ELKY back n the day.

[1096as]

Sweet rides guys, I'll keep you updated on the progress, first up it's find some engine mounts & move the trans crossmember. Let the fun begin..

Cheers,

Barra.

[1096as]

Hey Shawn,
I got an L98 intake manifold, injectros,fuel rails & throttle body the other day for $400 AUD. I'm still waiting for Bart to get back to me with a freight quote for the ecm, tcm & harnesses. Is he still contactable on hotrodrev@gmail.com , as I'v had no luck in getting any reply from that address lately.. Apart from that I've got my engine / trans sitting on custom eng mounts and am in the process of relocating the trans' crossmember to suit the 6L90.

Cheers,
Barra.

[1096as]

Fitted the L98 intake manifold, but had to remove the water pump as the top hose outlet hits on the L98 throttle body, I spoke to Bart at Hot Rod Rev' about this and he's hooking me up with a L99 one, as the LY6 has VVT ,a standard LS waterpump wont fit over the VVt front cover without spacers. Sowly coming together.

Cheers,
Barra